Setup Iphone in Solavei

Setup

When you receive your SIM card, insert it into the SIM slot.

Then set up your APN Settings on your iPhone to ensure your picture messaging and data (Internet) work.

Click the arrows or each step to see the corresponding screenshot on the iPhone.

  1. From the home screen, select Settings.
  2. Select General.
  3. Select Cellular. Note: in iOS 4 and iOS 5, this option will be called Network.
  4. Verify the following settings:
    • Cellular Data: On
    • 3G Enable: On
    • Data Roaming: On
  5. Select Cellular Data Network*.
  6. Enter the following information under the Cellular Data section:
    • APN: Solavei
    • Username: leave this blank
    • Password: leave this blank
  7. Enter the following information under the MMS section:
    • APN: Solavei
    • Username: leave this blank
    • Password: leave this blank
    • MMSC: http://solavei.mmsmvno.com/mms/wapenc
    • MMS Proxy: leave this blank
    • MMS Max Message Size: leave this blank
    • MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf
  8. Press the Home button to save the APN and exit to the main screen.
  9. Turn the device off and back on by holding the sleep button for a few seconds and sliding the red power off slider when it appears. Then turn it back on by holding the sleep button again for a few seconds.
  10. Test the connection by opening the Safari web browser and sending a picture message.

* If the “Cellular Data Network” option is not available in your settings, your iPhone is not unlocked.

If you are using iOS 4 or iOS 5, you can verify MMS is enabled:

  1. Select Settings.
  2. Select Messages.
  3. Set MMS Messaging to On.
Be Sociable, Share!

{ 0 comments… add one now }

Leave a Comment

Previous post:

Next post: